-22%
Umbrella - Ines Charcoal-Light Grey - 300x400x259cm
- Product Code: 0795606
- Availability: In Stock
- 895.00€
-
699.00€
Ines umbrella, is made from aluminium frame, steel cross base and on the top it is used polyester cover 250gr. Due to its many inclinations, and a 360 degrees rotating pole by hand it is very easy to use at any time. The base of the umbrella should be ballasted with an adequate weight. For measures 2x3m - 3x3m, 3x4m, the weight of the ballast must be at least 100kg; the measures 4x4m the weight of the ballast must be at least 160/200kg. The insufficient weight at the base of the umbrella seriously compromises its stability. In any case, do not use with rain, wind or bad weather . The product is made to act as parasol.
This product is intended for domestic use only. Powder coated frame (polyester). Aluminum pole, steel ribs. Polyester cover. Always close the parasol when not in use and in case of wind. In any case, do not use with rain,wind or bad weather: The product is made to act as parasol. Cases of wear (rust), distortion and discoloration of all the components of the product which is directly exposed to atmospheric agents, handling and/or daily use, are to be considered as normal and therefore, under no circumstances they will be evaluated as manufanturing defects as such because associated with the normal conditions of use of the item. The frame is easy to clean: use a damp and soft cloth. For the most persistant stains, a small amount of mild liquid soap diluted in water may be used. Always dry with a soft cloth after cleaning. Never use aggressive detergents. Never use abrasive sponges that may scratch the surfaces. It is advisable to store the product in a dry and ventilated place before winter or during the long periods it is not in use, in order to preserve its characteristics over time. We reject all responsibility for damages - including subsequent damage- caused by incorrect assembly or different from the instructions provided, or caused by different and improper use from that which the product is in intended.